Technical specifications of IC693DSM302
Brand GE Fanuc
Series Series 90-30
Part number IC693DSM302
Compatible component programmable logic controller
The block processing time is less than 5 milliseconds
Number of axes 2
Programming unit resolution (position) -8,388,608 to 8,388,607 user units per second
Programming unit resolution (velocity) from 1 to 8,388,607 user units per second
Programming unit resolution (acceleration) from 1 to 134,217,727 user units per second
Serial port RS-232 series
Nonvolatile memory 10 programs and 40 subroutines
450 mA at 5 V DC backplane current consumption (typical value)
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
The IC693DSM302 motion controller is a 90-30 series motion controller produced by GE Fanuc. The unit is compatible with the same family of PLC components and offers high performance and advanced features in machine control and automation applications. The IC693DSM302 controller has 2 axes, which can solve problems related to communication and operation between different components within the system. The IC693DSM302 motion controller is used to control GE digital servo motors and includes an integrated digital signal processor that is superior to similar controllers offered by other manufacturers. The IC693DSM302 controller also supports the control of SL series analog steering gear and third party analog steering gear. Operating with this controller requires minimal programming, and it allows the use of external programming devices. Additional programming devices are connected via the included RS-232 serial port, which is also used to perform firmware updates.
The GE Series 90-30 IC693DSM302 motion controller has a short block processing time of less than 5 ms, and the associated programming unit has the following parameters: -8,388,608 to 8,388,607 user units per second (for positioning), 1 to 8,388,607 user units per second (for speed), and 1 to 134,217,727 user units per second (for acceleration). The IC693DSM302 controller comes with an instruction set that allows users to take full advantage of all its features and provides non-volatile storage for up to 10 programs and 40 subroutines. Additional features of the IC693DSM302 controller include automatic data transfer, short-action program support, higher tracking accuracy, improved block start, user scaling, and servo adjustment.
