Technical specifications of IC693MDL310
Brand GE Intelligent Platform /GE Fanuc
Series Series 90-30
Part number IC693MDL310
Product type input module
The voltage is 120 volts AC
Input 12
The frequency is 50/60 Hertz
Output current 0.5 amp per point
Output current range 85 to 132 V AC
Dc power supply no
Ac power. Yes.
Output current leakage is 3 A at 120 V AC
Surge load current a 5
LED indicator 6
The GE Fanuc IC693MDL310 module is an output module with 12 output points divided into 2 groups of 6 points each. Manufactured as part of the GE Fanuc Series 90-30 PLC product line, the module is rated to operate at 120 volts AC and 0.5 amps. Each of the 2 groups has an isolated common area that is fixed inside the module. It allows each type to be used at all stages of power operation. The IC693MDL310 module is equipped with a 3 amp rated fuse to protect each group. Each output comes with an RC buffer to protect against transient electrical noise from the power cord. It provides a high level of inrush current, increasing the output's ability to control different incandescent and inductive loads.
The user of the IC693MDL310 output module must provide AC power to perform operations linked to the output. Additional features of the IC693MDL310 module include an LED indicator located at the top of the module that shows the "ON" and "OFF" status of each output point. It uses the first six leds labeled B1 through B6 on the bottom row to indicate the output status. It also has a plug-in between the inner and outer surfaces of the hinged door. The module has an output voltage range of 85 to 132 volts AC, with a current rating of 0.5 amps per point. It also has a surge load current of 5 amps for one cycle. It also comes with a module with a 3 MA output leakage current at a maximum of 120 volts AC.
