Technical specifications for IC693MDL390
Brand GE Intelligent Platform /GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Isolation, light and channel: 500 volts, continuous; 1500 VAC for 1 minute
Part number IC693MDL390
Product description Discrete output module
Output voltage range 85-264VAC (47 to 63 Hz)
Number of channels Five (5) independent isolation
Output current 2.0 amperes per point; 45 amps at 5.0 degrees Celsius and 60 amps at 2.0 degrees Celsius
Output signal range 85-264 volts AC
Maximum surge current 25 A 1 cycle
Product type output module
Nominal output voltage 120/240 volts AC
Current consumption 110 mA (all outputs valid)
Rated voltage 120/240 volts AC
Each point output current 2
On response time, maximum 1 ms
The IC693MDL390 is a five (5) channel discrete output module in the 90-30 series product category of Programmable Logic Controllers (PLCS). The module, formerly manufactured by GE Fanuc and now owned by Emerson Automation, features primarily isolated output channels that offer an 85-264 VAC output voltage range and a 50/60 Hz frequency. Each output channel generates up to 2 amps per point, while each module has a maximum output current of 5 amps at 45 degrees Celsius and up to 2 amps at an operating temperature of 60 degrees Celsius. Between each output point, the isolation rating is 500 volts, while the isolation rating from the field side to the logical side is 1500 VAC. The output module generates a maximum surge current of 25 amps in a single cycle, while the minimum load current is 100 mA. The maximum output voltage drop is measured at 1.5V and the maximum leakage current is 3 mA (at 120 VAC) and 6 mA (at 240 VAC). The module's output ON state transition delay duration is 1 ms, while for the OF response, the rated delay is 1/2 cycle. When all outputs are powered, the backplane current consumption of this module is 110 mA. Each output channel is equipped with 3 Class A fuses for protection. In addition, a resistor-capacitor buffer circuit is provided to eliminate transient electrical noise. It also provides separate LED status indicators to describe the power-on status of each output, and an "F" LED for the fuse indicator to report fuses that are blown.
The IC694MDL350 is an AC output module from the PACSystem RX3i Programmable Automation Controller (PAC) platform, previously offered by GE Intelligent Platforms and now by Emerson Automation. The module offers sixteen (16) independently isolated output channels that provide an output voltage range of 74-265 VAC and a frequency range of 47-63 Hz. When all outputs are active, the module consumes 315 mA and is powered by a 5VDC backplane supply. The module has A maximum rated output current of 2 A when operating at 30 degrees Celsius and 1 A at 60 degrees Celsius. The IC694MDL350 has field side to logical side and group to group isolation ratings with isolation ratings of 250 VAC, continuous and 1500 VAC, lasting 1 minute. The module's integrated diagnostic capabilities include reporting of removed or disconnected terminals. For terminating field devices, the IC694MDL350 requires a compatible detachable terminal base. For example, a box with catalog number IC694TBB032, an expansion box with part number IC694TBB132, a spring type with order number IC694TBS032, or an expansion spring type with catalog number IC694TBS132. The module occupies a slot in the RX3i backplane and must be installed with an RX3i CPU with firmware version 3.50 or later. This module is not compatible with the 90-30 series platforms. This module provides various status indicators. The LED is numbered to represent a specific module channel, and also comes with a "TB" LED that powers up when the module does not detect the terminal.
