Technical specifications for IC693MDL350
Brand GE Intelligent Platform /GE Fanuc
Series Series 90-30
Part number IC693MDL350
Product type output module
Rated voltage 120 to 240 V AC
Output voltage range 74 to 265 V AC
The frequency is 50 to 60 Hertz
Nominal output voltage 120 to 240 V AC
Output 16
Field to backplane isolation 250 V AC continuous; 1500 VAC for 1 minute
Group to group isolation 250 V AC continuous; 1500 VAC for 1 minute
Maximum inrush current of 20 amps per cycle
Minimum load current 10 ma per point
The GE Fanuc IC693MDL350 module is a 16-point isolated output module manufactured as part of the GE PLC (Programmable Logic Controller) Series 90-30. It operates at a rated voltage of 120 to 240 volts AC and provides 16 separate isolation points. The module is designed to be used with an AC power supply when running output loads. The IC693MDL350 module has a rated output current of 2 amps per point and a power consumption of approximately 315 mA at 5 volts bus voltage. It comes with a DIP switch located on the back that helps determine how the CPU runs when stopped. This switch is designed to select the default mode. There are 2 DIP switches on the module, but only one of the above is used. This switch can turn off the output whenever communication with the CPU is lost. When this happens, the switch will always be in the right position. When the switch is in the left position, the module output holds the programmed value.
When the GE Fanuc Series 90-30 IC693MDL350 16-point isolated output module is operating, appropriate external fuses should be used to prevent short circuits. The module has an LED indicator that indicates the presence of detachable terminals. When connecting the wiring terminal, the indicator is on green. When removing the wiring terminal, the indicator is on red. The IC693MDL350 module provides a high level of noise resistance to protect the output from electrical noise, thereby minimizing the need to use external buffers. The output of the GE Fanuc Series 90-30 IC693MDL350 module affects multiple inductor or incandescent lamp loads.
