Technical specifications of IC693MDL340
Brand GE Intelligent Platform /GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part number IC693MDL340
Product description Discrete output module
Number of channels 16 (16)
Nooooo. Group number two (2)
Product type output module
Nooooo. Number of channels per group 8 (8)
Rated voltage 120 V AC
Output signal range 85-132 volts AC
Output voltage range 85 to 132 V AC
Nominal output voltage 120 volts AC
The frequency is 50 to 60 Hertz
The IC930MDL340 is a 90-30 series discrete output module. The module manufactured by GE Fanuc before, now belongs to Emerson's automation. The module has sixteen (16) output channels, each capable of providing A rated output voltage of 120 VAC and a rated output current of 0.5 A. The module has two (2) sets of output channels, each with eight (8) channels. In addition, one (1) common terminal is provided per set to provide isolation. The IC930MDL340 is commonly used to power electrical loads, such as relay coils, indicators, and other electrical devices with low current ratings. It is used to implement the output command as a result of processing the downloaded user logic to the CPU. Each group has A maximum output current of 3 A and a minimum load current of 50 mA. Other output features of the module include A maximum surge current of 20 A and a minimum load current of 50 mA for one cycle. At a nominal voltage of 120 VAC, it has an output voltage drop of 1.5 VAV and a maximum output leakage current of 2 mA. The maximum on-conversion delay for each output channel is 1 ms and the turn-off delay is 1/2 cycle. The module has a power consumption of 315 mA when all output channels are powered on. The IC930MDL340 provides a separate status indicator for each output channel. It describes the running state of each channel of the output module. It also offers a fuse indicator LED, which energizes when an internal fuse blows.
The GE Fanuc IC693MDL340 module is an output module manufactured as part of the GE Intelligent Platforms/GE Fanuc series 90-30 product line. It has a 120 volt AC voltage rating and a 0.5 amp current rating, and offers 16 output points divided into 2 separate groups of 8 points each, each with a separate common point. The IC693MDL340 module allows each group to be used with an independent phase of the AC power supply. The two common Spaces can also be powered by the same power source. Each set has a 3 amp fuse for protection, and an RC buffer for output to protect them from the transient electrical noise of the power line. The GE Fanuc IC693MDL340 module has an 85 to 132 volt AC output voltage range, a 50 to 60 Hz frequency, and a maximum output current of 0.5 amps per point. Each group allows a full current of 3 amps per group. The IC693MDL340 module provides high inrush current, which makes the output suitable for controlling different loads, including incandescent and inductive loads. The operator of this module must provide AC power to the module to help it run the load connected to the output. The IC693MDL340 module can only run with AC power. It ON the top of the equipment with LED lights, can display each output point ON and OFF states. The leds are arranged in 2 rows with 8 green leds per row and a red LED between the two rows.
