Technical specifications for IC693MDL634
Brand GE Intelligent Platform /GE Fanuc
Series Series 90-30
Part number IC693MDL634
Product line series 90-30
Product type input module
Rated voltage 24 V DC
Input voltage range 0 to 30 V DC
Enter 8
Isolation 1500 volts between field side and logical side
Typical input current at rated voltage is 7 mA
On-voltage 11.5 to 30 V DC
Off state voltage 0 to 5 V DC
The minimum conduction current is 3.2 mA
Off-state The maximum current is 1.1 mA
The GE Fanuc IC693MDL634 module is an input module with a rated voltage of 24 volts DC. It is part of the Programmable Logic controller or PLC Series 90-30 product line manufactured by GE Intelligent Platforms/GE Fanuc. The module has a set of 8 input points as well as a common power input terminal. The configuration of the GE Fanuc IC693MDL634 module allows the use of negative and positive logic features. Some of these input features are best suited to various user-supplied input devices, such as buttons and limit switches. When current flows through the input point, the input status table causes the logic level to be 1. The power supply for running field equipment can be provided by the operator, but the isolated output power of +24 V DC can be used as a power supply for limited DC input.
The GE Fanuc IC693MDL634 input module has an input voltage range of 0 to 30 volts DC with an average rated input current of 7 mA at rated voltage. The module also has an on-voltage range of 11.5 to 30 volts DC, and an off-state voltage range of 0 to 5 volts DC. It has a minimum conduction current of 3.2 MA and a maximum shutdown current of 1.1 mA. The IC693MDL634 module has an LED indicator that shows the "ON" and "OFF" status of each of the eight input points. There is a plug-in that separates the inner and outer surfaces of the GE Fanuc IC693MDL634 module hinge door, which can be identified by the blue left edge, which signals when the module is low.
