Technical specifications of IC693MDL648
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL648
Module type Discrete input
Power Supply Type DC
Input voltage range 0 to 60 VDC
Input current (mA) 4.2
Number of points 16
Response time (ms) 1 ms on /1 ms off
Trigger voltage 34 to 60 volts
Product life cycle status * Discontinued/obsolete
The IC693MDL648 module is a discrete input module manufactured for programmable logic controllers or PLCS manufactured by GE Fanuc. The PLC discrete input module is classified as the 90-30 series of GE Fanuc PLC. It is a positive and negative logic input device with a fixed voltage of 48 V DC, with up to 16 input points. The input voltage range of the IC693MDL648 module is 0 to 60 volts DC, while the input current is rated at 4.2 mA. This 16-point PLC discrete input module has a trigger voltage of 34 to 60 volts, and the connector type is the terminal connector with 20 screws that comes with the module. The IC693MDL648 module also has a 5-volt DC current of 80 mA or a 24-volt DC current of 125 mA when isolated.
The backplane of the IC693MDL648 module consists of three main parts. The three components on the bottom plate include a circuit board mounted on a metal backplane through a plastic cover, an I/O bus expansion cable, and a dedicated I/O communication bus. The metal backplane of the IC693MDL648 module has four holes for mounting the base plate and is also equipped with fixing slots for mounting the module. Ideally, GE Fanuc PLC controllers have up to 5 pre-wired I/O bus expansion cables. The signals on the remote backplane are optically coupled to an isolated DC-DC power converter, which is used to isolate signals from other backplanes. The IC693MDL648 module has a power bus that connects the power output to the module in the backplane. Its I/O communication bus is installed with the I/O module through the bus. The bus is connected to the I/O bus in the extension rack and remote rack via I/O bus extension connectors and cables.
