Technical specifications for IC693MDL652
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL652
Trigger voltage 34-60
Each ordinary card has 16 points
Connector Type Terminal (20 screws), included in the module.
Module type Discrete input
Input current 4.2 MA
The internal power used is 80 mA at 5 VDC and 125 mA isolated at 24 VDC
Compatible baseboard with 5 or 10 slots
Product life cycle status * Discontinued/obsolete
The IC693MDL652 module is a discrete input module manufactured by GE Fanuc. The module has an active lifecycle state and is a discrete input module type. The module is part of a GE Fanuc PLC or programmable logic controller with an input voltage range of 0 to 60 volts DC, while the input current is rated at 4.2 mA. The IC693MDL652 input module is a 16-point input module with a response time of 1 millisecond, a shutdown of 1 millisecond and a trigger voltage rating of 34 to 60 volts. The discrete input module is of the terminal connector type and can be equipped with up to 20 screws. The internal power used is 80 mA at 5 volts DC and up to 125 mA at 24 volts DC isolation.
The C693MDL652 module has a rated input current of 7.5 MA at rated voltage. The on-state voltage is rated at 15 volts DC (minimum) and 6 volts DC (maximum). The input device is connected between the positive power bus and the circuit input. When connected to the negative logic, the component provides current to the user common or negative power bus through an input device. The IC693MDL652 module is installed in the I/O slot of the 5-slot or 10-slot baseplate in the 90-30 series PLC system. The input emulator module on the IC693MDL652 module has up to 16 two-position switches on the front of the module. Each switch is programmed as a discrete input device. The module allows emulation of 8-point or 16-point input modules. It has LED indicators corresponding to each switch position.
