Technical specifications of IC693MDL660
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (ex); Emerson Automation (Current) Emerson Automation (current)
Part number IC693MDL660
Series Series 90-30
Rated voltage 24 V DC
Part number IC693MDL660
Input voltage range 0-30 volts DC
Product description Discrete input module
Input 32 per module (4 sets of 2 regular cards per set)
Number of channels 32 (32)
1500 volts between the isolated magnetic field side and the logical side
Nooooo. Group number four (4)
The input current rated voltage is 7.0 mA
Nooooo. Number of channels per group 8 (8)
The minimum switching voltage is 15 volts DC
1500 VAC between isolated field side and logical side
Nominal output voltage 24 volts DC
The IC693MDL660 is a discrete input module for the 90-30 series Programmable Logic Controller (PLC) platform from GE Fanuc. The module has thirty-two (32) input channels and accepts an input voltage signal range of 0-30 VD and a nominal voltage of 24 VDC. This is a high density input module designed for use with IC694TBB032 box or IC694TBS032 spring clip terminals. The IC693MDL660 is a single-slot module that can be installed in any I/O slot on a 5-slot or 10-slot baseplate of the 90-30 series. The input channels of the module are divided into four (4) channels, each group of eight (8) channels. Each point is assigned multiple status LED indicators that light up green when in Logic 1 condition. The input channel is activated in the input voltage range of 11.5-30.0 VDC, and the input current is 7 mA (typical value) at the rated voltage. The number of IC693MDL660 instances is limited by the host controller's I/O capacity, memory capacity, and available slots. It can be used as a local output module component for modular and compact series 90-30 controllers, or as a distributed output module component for large remote I/O networks. The module supports positive and negative logical cabling configurations. This enables compatibility for use in different regions, installation zones, and safety considerations. Positive logic wiring is used when the positive line of the voltage source is used to force the logic 1 state of the input channel, while negative logic wiring refers to the negative line used to indicate the logic 1 state. In positive logic, the common line is a negative line, while in negative logic, the common line is a positive line.
The IC693MDL660 module is a GE Fanuc discrete I/O module. The module is classified as GE Fanuc Programmable Logic Controller or PLC 90-30 series. It is a DC voltage input module with 24 volts DC positive or negative logic and comes with up to 32 input points. The module has an active life cycle state and is a discrete input module type with an input voltage range of 0 to 30 volts DC. The IC693MDL660 module has a rated input current of 7 MA, and it is a 32-point module with an on and off response time of 50 milliseconds. The IC693MDL660 module has a trigger voltage of 11.5 to 30 volts with up to 8 points per connection. The component has an internal power of 300 mA per 5 volts of DC. The GE Fanuc IC693MDL660 module and various discrete input modules are used as interfaces between the PLC and external input devices. Examples of input devices that use discrete inputs include proximity sensors, buttons, switches, and BCD finger wheels. GE Fanuc's output modules provide an interface between the PLC and external output devices, including contractors, intermediate relays, BDC displays and indicators. Please note that GE Fanuc discrete I/O modules support different voltage ranges and types. In addition, current capacity, isolation and response time to meet application requirements will vary from module to module. The IC693MDL660 module is a multifunctional module that can be programmed for a variety of applications and assembled from a variety of modular plug-in components.
