Technical specifications for IC693MDL734
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL734
Product Type Digital I/O
Compatibility GE Fanuc 90-30 Programmable controllers
Rated voltage 125 V DC
Peak module current consumption 90 MA
Module voltage input 5 volts DC
Output point 6
Peak current of 1 amp per output
Isolation 1500 volts
Product life cycle status * Discontinued/obsolete
The IC693MDL734 module is a GE Fanuc 6-point I/O module. It is compatible with GE series 90-30 PLCS. The IC693MDL734 module is a 125 volt DC positive/negative logic 1 amp output module. It provides six isolated output points, each with an associated common output terminal. The corresponding output terminals have a negative logic characteristic, that is, the load current is absorbed into the user public bus or the negative bus, or a positive logic characteristic, because they provide current from the positive power bus or the user public bus to the connected load. The IC693MDL734 module is compatible with indicators, solenids and motor starters. The IC693MDL734 module can be installed in any slot of a 90-30 series PLC with a 5-slot or 10-slot baseplate.
When all outputs are turned on, the IC693MDL734 module consumes 90 mah of current. The module requires 5 volts DC supply voltage. The maximum rated output current at each point is 1 amp. The rated module voltage is 125 volts DC and the output voltage range is 10.8 to 150 volts DC. Other output features include 15.89 amps of inrush current, 1 volt of maximum output voltage drop, 1 MA of maximum output turn-off state leakage, up to 7 ms of on-off response time and up to 5 ms of turn-off response time. The IC693MDL734 module has 6 isolated outputs with an isolated voltage of 1500 volts. The LED indicator is located on the top of the IC693MDL734 module. The LED block has 2 horizontal rows of 8 green leds per row, but the module only uses the first 6 leds of each row.
