Technical specifications of IC693MDL740
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL740
Product Description Positive logic output module
Module circuit type procurement
Number of channels 16 (16)
Output voltage range 12 to 24 volts DC (+20%, -15%)
Nominal voltage output 12/24 V DC
Nooooo. Number of groups Two (2) groups
Nooooo. Number of channels per group eight (8) channels
The output current of each channel is 0.5 amps
The output current at each common end is 2 amps for 10 milliseconds
Surge current 4.78 amps for 10 milliseconds
The IC693MDL740 is a GE Fanuc series 90-30 Programmable Logic controller (PLC) module. The module is a positive logic output module, specifically, providing current from the module common or positive power bus to the connected load. It has two (2) groups of eight (8) channels each with a rated load of 0.5 amps per channel.
The IC693MDL740 has a front panel LED indicator located at the top of the module. These leds represent the drive status of each module channel and the operating status of the module. As a source output module, each channel of the module is capable of powering common electrical loads such as contactors, relays, indicators, buzzers, horns, and other D24 VDC powered devices. The module does not come with an internal fuse, so an external fuse can be installed to further protect the module. The IC693MDL740 can be installed in any available slot on a 5-slot or 10-slot 90-30 series baseboard. As long as the controller has enough memory to accommodate this 16-point output module, the number of module instances will vary.
The IC693MDL740 is rated at 12/24 volts DC and operates in a voltage range of 12 to 24 volts DC (+20%, -15%). The module's output features include a 4.78 amp surge current lasting 10 ms, a maximum output voltage drop of 1 VDC, a turn-off leakage current of 1 mA, a response time of 2 ms ON (maximum) and a response time of 2 ms OFF (maximum). The module has a power consumption of 110 mA on the 5 V bus on the backplane (all outputs are turned on).
The IC693MDL740 module is a 12 to 24 volt DC rated positive logic output module. There are 16 output points, divided into 2 groups of 8 each, each group has a common power output terminal. The IC693MDL740 module has a positive logic feature and is used as a current source for the user's common and positive power bus loads. The output device is connected between the negative power bus and the module output. The IC693MDL740 module is compatible with a wide range of load devices, including solenids and motor starters. The module has an output voltage range of 12 to 24 volts DC. The maximum output current at each module point is 0.5 amps and the maximum output current at each common end is 2 amps. The corresponding maximum on and off response time is 2 milliseconds. The rated surge current for a duration of 10 milliseconds is 4.78 amps.
