Technical specifications of IC693MDL741
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Part number IC693MDL741
Series Series 90-30
Product Type Digital I/O
Part number IC693MDL741
Compatibility GE Fanuc 90-30 Programmable controllers
Product description Discrete output module
Output point 16
Number of channels 16 (16)
Peak module current consumption 110 MA
Nooooo. Number of output groups two (2)
Module voltage input 5 volts DC
Number of channels per group 8 (8)
Rated voltage 12/24 V DC
The IC693MDL741 is part of Emerson Automation's 90-30 series Programmable Logic controller (PLC) platform, which was previously from GE Fanuc. The module is a discrete output module and supports negative logic cabling. The module is equipped with sixteen (16) output LED indicators that describe the operating status of each channel of the module. The IC693MDL741 offers 12 to 24 volts DC, +20% and -15% output voltage ranges. It has a rated output current of 0.5 amps per point and 2.0 amps per common end, while the output is grouped into eight (8) channels per group. This module does not come with individual channel isolation, but provides group isolation. The inter-group isolation between the field side and the logical side or between the optical isolation is rated at 500 V and 1500 V. The module also provides a module insert where the user can provide a short written description of the assigned output. The IC693MDL741 is installed on the 90-30 series baseplate and occupies one slot. It can be used as a local output component, installed with the CPU backboard, or as a distributed I/O module component. The module's output features include a 0.5V voltage drop, 1 mA off state leakage, and a maximum signal on and off response time of 2 ms. When all outputs are energized, the IC693MDL741 consumes 110 mA and is powered by a 5VDC backplane. The IC693MDL741 is capable of powering electrical loads such as motor starters, solenids, indicators and signalers. It can also be used with AC loads, provided that a plug-in relay is installed between the two.
The 16-point IC693MDL741 module is the I/O module of GE Fanuc series 90-30 PLC. The module can be installed in any slot of the GE series 90-30 PLC, which has a 5-slot or 10-slot baseplate. The backboard forms the basis of the PLC on which all other components are mounted. When all points on the IC693MDL741 module are open, the module current drawn from the baseplate is 110 mA. The voltage input of the module is 5 volts DC. The IC693MDL741 module does not contain any fuses. The IC693MDL741 module is a 12 to 24 volt negative logic output module. The module provides 2 sets of 16 output points, each with a common output power terminal. Leds are provided on the module to indicate the off status of the output point. The IC693MDL741 module absorbs current from the load to the negative power bus or user common end, so it has negative logic characteristics. Solenoids and indicators are some of the devices that can be used with the IC693MDL741 module. The output voltage ranges from 12 to 24 volts DC. Isolation of up to 1500 V is provided between the field and the logical side, and 500 V is provided between groups. The peak output voltage drops to 0.5 volts. Peak off state leakage is 1 MA. The module operates and stores at temperatures ranging from 0 to 60 degrees Celsius and -40 to 85 degrees Celsius, respectively.
