Technical specifications of the IC697CHS791
Manufacturer GE Fanuc
Series 90-70 series
Part number IC697CHS791
Product Type 9 Slot module rack
Voltage type AC or DC
Mounting rack mounting
Dimensions 11.15x19x7.5 inches
Cooling fans are usually not required
I/O bus current 0.5 amps
Mechanical module keying support
The GE Fanuc IC697CHS791 rack is a standard 9-slot rack mounted on the front. The 9-slot rack is part of GE's 90-70 series product line. The IC697CHS791 9-slot rack is designed to be part of the foundation of a programmable logic controller or PLC system and hosts up to nine PLC modules at a time. The IC697CHS791 measures 11.15 x 19 x 7.5 inches. The rack can be mounted on the front of another rack, which is a standard 19-inch or 480mm rack and usually does not require a fan to be installed for cooling. The IC697CHS791 racks can be used in any 90-70 series PLC I/O and CPU configuration, and they accept all types of GE 90-70 IC697 PLC modules.
On the GE IC697CHS791 9-slot standard rack, there is a power connector on the left side of all module slots for connecting the rack's power modules. The power supply can be AC or DC. The rack can also be connected to another rack, and they can share a power supply in an extended I/O application setup, and this connection can be achieved through the GE Power expansion cable suite. The IC697CHS791 9-slot rack requires 0.5 amps of current from the I/O bus. It hosts modules that are held in place by mechanical keying. Modules that have been keyed into place can be removed if necessary, but keying prevents them from being easily removed, installed in the wrong slot, or used to replace the wrong module.
