Technical specifications for IC697CPM914
Brand GE Fanuc
Series 90-70 series
Part number IC697CPM914
Product Type CPU module
Compatibility GE Fanuc 90-70 PLC controller
Current consumption is 2.8 amps
Voltage input 5 volts DC
Clock speed 32 megahertz
Microprocessor 80486DX series
Serial port 1
Supports analog I/O 8000
The IC697CPM914 module is a 32-bit CPU module that supports floating-point operations. The module uses an 80486DX processor with a clock speed of 32 megahertz. The power requirements for the module are 2.8 amps of nominal current and 5 volts DC. The IC697CPM914 module supports up to 512 KB of RAM. The memory is powered by an onboard lithium battery, which provides a memory retention period of 6 months. RS-422/RS-485 compatible serial ports are available on the module. This port can be used to connect to a workstation interface in a programming computer. The serial port can also be connected to a serial port on a programming computer via an RS-422 to RS-232 converter. The serial port on the IC697CPM914 module has a 15-pin D-connector.
Parallel with the bus transmitter module port can also be used to connect the IC697CPM914 CPU module to an MS-DOs-based programmer. Ethernet connectivity for CPU programming is also supported. The IC697CPM914 module supports up to 8,000 analog I/ OS and 12,000 I/ OS for any mix. A slot is required in the PLC rack for the CPU module. Four status leds provide status updates. Programming and configuration of the IC697CPM914 module requires software, as the CPU does not have a DIP switch for configuration. Multiple optional modules are supported, including Ethernet, coprocessor, bus controller, and I/O modules. The recommended operating temperature range of the module is 0 to 60 degrees Celsius. The recommended range of relative humidity is 5% to 95%.
