Technical specifications for IC697CPM915
Brand GE Fanuc
Series 90-70 series
Part number IC697CPM915
Product Type CPU module
Compatibility GE Fanuc 90-70 PLC controller
Clock speed 32 megahertz
Ram 1 Megabyte
Current consumption is 2.8 amps
Input voltage 5 volts DC
Serial port 1
Operating temperature 0 to 60 degrees Celsius
The GE Fanuc IC697CPM915 module is a single-slot programmable CPU module. The IC697CPM915 module can be configured using Windows or MS-DOs-based software to control material handling systems, machines, and processes. CPU programming is performed over Ethernet or SNP ports. Programmer connection over Ethernet requires the installation of an optional Ethernet module. The IC697CPM915 module communicates with the option module and I/O through the rack backplane using the VME C.1 standard format. The IC697CPM915 is compatible with the IC697CHS750, IC697CHS782, IC697CHS783, IC697CHS790, and IC697CHS791 racks. The IC697CPM915 module can be installed only in slot 1 of the rack. The operation of the IC697CPM915 module is controlled by the RUN/STOP switch or remotely via a programmer connected to the RS-422/RS-485 serial port on the CPU module.
Four green leds are provided on the IC697CPM915 CPU module to display the CPU status. The IC697CPM915 module is a 32 MHZ CPU module that supports floating-point arithmetic. The user memory on the module is 1 Megabyte. A lithium battery mounted on the module provides battery backup for data stored in the user's memory. When the PLC rack is not powered on, the nominal memory retention time is 6 months. Flash memory is used to store system firmware. The IC697CPM915 module is designed for GE Fanuc 60-70 series PLC systems. The current consumption of the IC697CPM915 module is 2.8 amps (nominal value) from the 5 volt DC bus. Available option modules include all IC697 LAN modules, numerous coprocessor modules, and bus controllers for the IC660, IC661 I/O, and IC697 series analog and discrete I/O modules.
