Technical specifications for IC697CPM924
Brand GE Fanuc
Series 90-70 series
Part number IC697CPM924
Product Type CPU module
Compatibility GE Fanuc 90-70 PLC controller
Clock speed 64 megahertz
Ram 1 Megabyte
The battery memory is retained for 6 months
Floating-point arithmetic, yes.
Serial port 1
Operating temperature 0 to 60 degrees Celsius
The IC697CPM924 module is a GE Fanuc CPU module that is compatible with GE series 90-70 programmable logic controller systems. The IC697CPM924 module is a 32-bit CPU with a microprocessor clock rate of 64 MHZ. In addition to fixed-point operations, the CPU also supports floating-point operations. A total of 1 MB of RAM is available on the CPU module. The replaceable lithium battery provides backup power to the RAM in the event of a primary power failure. Lithium batteries have a rated shelf life of 10 years at ambient temperatures of 68 degrees Fahrenheit. If the PLC rack power is removed, the battery can provide backup power to the RAM so that the stored application data is nominally retained for 6 months. Before installing the new battery, you need to remove the old battery.
The IC697CPM924 CPU module operates from 0 to 60 degrees Celsius. If the ambient temperature exceeds this range, performance may deteriorate, and extreme high temperatures may even cause module failure. The time clock on the IC697CPM924 module has an accuracy of up to 3.5 seconds per day. Run clock accuracy up to 0.1%. The IC697CPM924 module supports software configuration, including an integrated serial port, a parallel port on the bus transmitter PLC module and an optional Ethernet module that can be used to connect to the computer running the configuration software. The operation of the IC697CPM924 module is controlled by a 3-bit RUN/STOP switch or remotely from the programming computer. The power supply should be disconnected from the PLC rack before installing the module.
