Technical specifications for IC697CPX928
Brand GE Fanuc
Series 90-70 series
Part number IC697CPX928
Product Type CPU module
Compatibility GE Fanuc 90-70 programmable controllers
Microprocessor 80486DX4
Clock speed 96 MHZ
Ram 6 MB
Current consumption 3.1 amps
Input voltage 5 volts DC
Scan rate 0.4 μs per Boolean function
Flash memory 256KB
The IC697CPX928 is capable of handling any combination of inputs and outputs up to 12K, and analog inputs and outputs up to 8K. It supports 32-bit floating point data.
The IC697CPX928 is configured using programming software. It does not have jumper terminals or DIP switches for hardware parameter setting. Application software is programmed by MS-DOS software products or Windows-based software products running on Windows 95 or Windows NT over Ethernet TCP/IP or via SNP ports.
The controller is specially equipped with seven (7) status leds, a lithium battery for retaining the contents of random access memory (RAM), and communication ports such as one (1) RS232 serial port, two (2) RS485 serial ports, and one (1) factory reset port.
The IC697CPX928 is compatible with various option modules to enhance the CPU and provide it with additional functionality. These option modules include Ethernet interface modules, programmable coprocessors, alphanumeric coprocessors, bus controllers, communication modules, I/O Link interfaces, and the entire IC697 family of discrete and analog I/O modules.
The nominal current required for the IC697CPX928 module is 3.1 amps. The required input voltage is 5 volts DC. The module has a forced air cooling rating of 70 CFM and can operate at ambient temperatures ranging from 32 to 140 degrees Fahrenheit. Without forced air cooling, the operating temperature range of the IC697CPX928 CPU module is reduced to between 32 and 122 degrees Fahrenheit. Depending on the type of power supply available, a rack fan assembly powered by 120 VAC, 240 VAC or 24 VDC can be installed on the IC697CPX928 module. The CPU module has three serial ports, of which two ports support RS-485 communication and one port supports RS-232 communication. These serial ports can be used to connect programming devices for CPU configuration. In addition, an optional Ethernet module can be installed in the PLC to configure the IC697CPX928 module over Ethernet. The IC697CPX928 module supports up to 8,000 analog I/ OS and 12,000 I/ OS (any mix). The IC697CPX928 module requires one slot in the GE Fanuc Series 90-70 PLC rack. A total of 7 leds are provided on the front of the module for status updates.
