Technical specifications for IC697CPX782
Brand GE Fanuc
Series 90-70 series
Part number IC697CPX782
Product Type CPU module
Compatibility GE Fanuc 90-70 programmable controllers
Ram 1 MB
NV-RAM The memory is 256 KB
Microprocessor 80486DX4
Clock speed 96 megahertz
Serial port 3
Voltage input 5 volts DC
The IC697CPX782 module is a CPU module designed for use with GE Fanuc series 90-70 programmable logic controllers. In addition to 1 MB of battery-operated memory, the module includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in version 7.92 and later. The microprocessor on which the IC697CPX782 module is based is the 80486DX4 microprocessor with a clock speed of 96 MHz. The IC697CPX782 module supports up to 8,000 analog I/ OS and 12,000 I/ OS (any mix). The rated time taken to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports firmware upgrade in the system. The configuration of the modules is performed by software running on computers that are connected to the modules via Ethernet or serial connections.
Connecting the programmer to the IC697CPX782 module via Ethernet requires an Ethernet interface module to be installed in the PLC. Connecting the programmer to the IC697CPX782 module via serial ports can be done via 3 onboard serial ports. The three ports support the following protocols: Port 1 supports RS-232 communication, and port 2 and port 3 both support RS-485 communication. Three of the five LED indicators on the front panel of the module provide serial terminal status. A serial cable is required to connect to port 1, and converters are also required for ports 2 and 3. Module batteries have a shelf life of 20 years at 5 degrees Celsius. The IC697CPX782 module requires 3.1 amps of nominal current from a 5 volt bus. The recommended operating temperature range is 0 to 60 degrees Celsius.
