Technical specifications of IC697MDL250
Brand GE Intelligent Platform /GE Fanuc
Series 90-70 series
Part number IC697MDL250
Product type Discrete input module
Rated voltage 120 V AC
Input quantity 32
Input current 10 MA
The required current is 0.35
Frequency 60 Hz
Dc power supply no
Ac power. Yes.
LED indicator Yes
The GE Fanuc IC697MDL250 discrete input module belongs to the 90-70 series. The module has 32 input points divided into 4 isolation groups, each consisting of 8 points, and can be applied to a variety of AC power supply phases. The IC697MDL250 input module operates at 120 volts AC and the input filtering time is 20 milliseconds. It has a reactance input that meets the requirements of the IEC standard Type 2, and the input characteristics are perfectly matched to a variety of proximity switches. The module has LED indicators that show the on and off status of each point on the PLC side. These metrics are located at the top of the input module. The GE Fanuc module is mechanically adjusted to easily replace the same field type module. Input and output references can be configured by the operator without the need for DIP switches and jumpers.
The configuration of the GE Fanuc Series 90-70 IC697MDL250 discrete input module is done through the Windows operating system or MS-DOS operating system, and the configuration function is pre-installed on the module. The IC697MDL250 discrete input module is very flexible and can be used with a variety of input devices, such as select switches, buttons, electronic 2-wire or 3-wire proximity switches and limit switches. It comes with an input circuit for low heat dissipation, which further contributes to the extended service life and extremely high reliability of the device. The IC697MDL250 input module has a mechanical key designed to prevent accidental replacement of the module type in a particular slot. Below the connector is a uniquely shaped point below the board where the key fits.
