Technical specifications for IC697MDL251
Brand GE Intelligent Platform /GE Fanuc
Series 90-70 series
Part number IC697MDL251
Product type input module
Rated voltage 120 V AC
Enter 32
Input current 10 MA
The required current is 0.35
Frequency 60 Hz
Dc power supply no
Ac power. Yes.
LED indicator Yes
The GE Fanuc IC697MDL251 module is an input module manufactured by GE Fanuc as part of the 90-70 series product line. The IC697MDL251 input module comes with 16 input points, which are divided into 4 separate groups of 4 points each. Each of these groups is compatible with a different AC voltage power supply phase and can be used with a different AC voltage power supply phase because each group is isolated. The IC697MDL251 module is mechanically adjusted to allow easy replacement of similar modules in the field. The 16-point input module perfectly matches a variety of input devices, including limit and selection switches, buttons, and electronic 2-wire and 3-wire proximity switches. A current of 0.35 amps is required to pass through the 5-volt bus on the backplane of the device.
The GE Fanuc IC697MDL251 input module has a mechanical key specifically designed to prevent any accidental or unauthorized switching of the module in a particular slot. When the user wants to change the position of the module after the key locking process, the module allows the key to be removed when pushed up, so it unlocks when the key leaves the rail. Once the installation location is determined, you can reinsert the module and key. The wiring of the IC697MDL251 module needs to be connected from the power supply to the input terminals of all 4 input groups. Wire diameters 14 to 22 are available for detachable field wiring terminal boards. The cable harness is protected on the terminal board by cable ties. The cable ties pass through the cleats at the lower corners of the circuit board. When removing the board, the main power supply must be turned off.
