Technical specifications of IC697MDL340
Brand GE Intelligent Platform /GE Fanuc
Series 90-70 series
Part number IC697MDL340A
Product type output module
Rated voltage 120 V AC
Output 16
Output current/point a 2
Output current/group one 4
The required current is 0.25
Frequency 47-63 Hertz
Dc power supply no
Ac power. Yes.
LED indicator Yes
The IC697MDL340 output module is a product of GE Intelligent Platforms/GE Fanuc and is manufactured as a member of the 90-70 series. The module has a 120 volt AC rating and a total of 16 points isolated in 4 different groups. The capacity of each isolation group is 4 amps per group, 2 amps per point, and the surge current is 10 times. This GE Fanuc discrete output module is designed and intended to enable groups of output points to operate as different phases of an AC power supply. It has 4 sets of outputs, each of which is blown with a 10 amp rated fuse. The IC697MDL340 output module provides high level inrush current, making the output suitable for multiple incandescent lamps and inductive loads.
The GE Fanuc IC697MDL340 output module is suitable for most number 4 contactors. It has an LED indicator on the top of the device to show the on and off status of each point on the PLC side of the circuit. It also has an LED that shows the status of fuses grouped at the top of the module. The GE Fanuc IC697MDL340 output module is mechanically keyed, thus ensuring that it can be correctly replaced in the field with the same type of module. Operators can perform I/O referenced configurations without the need for jumpers and DIP switches. The GE Fanuc IC697MDL340 output module is compatible and can be used with different load devices, such as motor starters, solenids and indicators. Each output point has a rated current of 2 amps, which is related to the long-term capacity of each point. Because the modules dissipate heat from the inside, the current capacity of each set is limited to 4 amps.
