Technical specifications of IC697MDL750
Brand GE Fanuc
Series 90-70 series
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Series 90-70 series
Part number IC697MDL750
Product description Discrete output module
Product description Discrete output module
Rated voltage 24 to 48 volts DC
Number of channels 32 (32)
Nooooo. Number of output groups four (4)
Output current 0.5 amps per point, 2 amps per group
Nooooo. Number of output groups four (4)
Number of channels per group 8 (8)
Output voltage range 20 to 60 volts DC
The IC697MDL750 is a digital output module that is part of the 9-70 series of programmable logic controllers (PLCS), formerly manufactured by GE Fanuc and now owned by Emerson Automation. The module is a single slot module that can be installed in an empty slot in the 90-70 series baseplate. It supports local I/O operations or as part of a large distributed I/O architecture. The IC697MDL750 features primarily thirty-two (32) discrete output channels that provide an output voltage range of 20-60 VDC and a rated voltage of 24/48 VDC. It can be used to power a variety of electrical loads, either manually or automatically. Compatible devices include motor starters, solenoid drive devices, and indicators. Each channel of the module provides an output current of 0.5 amps, and each output group is rated at 2.0 amps. This output module has four (4) groups of eight (8) channels each. Module isolation provides up to group isolation with an inter-group isolation rating of 5000 volts, while the backplane for each output channel is rated at 1500 volts. The module has a maximum surge current of 10 amps and a duration of 20 milliseconds. The maximum output voltage drop is 1 V, while the maximum delay in a single channel response time is 1 ms. Each channel also exhibits a leakage current equivalent to 1 mA. The IC697MDL750 has a current consumption of 0.25 amps and is not designed to be compatible with VME standard C.1. The module comes with a high-density detachable terminal that is ideal for use with wiring harnesses. Each terminal of the detachable terminal accepts up to two (2) wires in sizes #22 AWG (0.36 mm2) to #14 AWG (2.10 mm2).
The discrete output module, known as the IC697MDL750 output module, is designed and manufactured by GE Fanuc, a renowned producer of high quality and robust industrial components. The module is part of the GE Series 90-70 and complies with the regulations set out in standard C.1 of the VME standard. The module requires 0.25 amps of current from a 5-volt bus and has an isolation voltage of 500 volts between the output groups. The isolation voltage output from the backplane is 1500 volts. The IC697MDL750 output module has a total of 32 outputs arranged in equal isolation groups. The module has a 10 amp surge current, lasting 20 ms and a 1 ms response time (on/off). The IC697MDL750 output module has a rated voltage drop of only 1 volt (2 ohms) and an output voltage range of 20 to 60 volts DC. The unit operates at 24 to 48 volts direct current. The module installation process is very simple, and the wiring process is also very simple. The module is designed to allow for easy maintenance, and its construction with mechanical keys does not allow for error. Due to this key, any module with an incorrect module type cannot fit into the slot reserved for the IC697MDL750 module. The module has a rated current of 0.5 amps per point and a maximum current of 2 amps for the input group. The module is protected from voltage surges and works perfectly with devices with steady-state currents of 100 to 500 mA. For the lowest steady state current levels, these devices have a repetition rate of up to 5 Hz
