Technical specifications of IC697MDL752
Brand GE Fanuc
Series 90-70 series
Part number IC697MDL752
Rated voltage 12 volts DC
Output current 0.5 amps per point, 2 amps per group
Output voltage range 10 to 15 volts DC
Required current 0.25 amps
Output quantity 32
Isolation voltage 1500 volts
Surge current 10 amps (Max.) for 20 milliseconds
Response time 1 ms (Max)
Response time 1 ms (Max)
Output voltage drop 1 V /2 ohms (Max)
The IC697MDL752 output module is a GE Fanuc component designed to be installed into the rack of the GE series 90-70 PLC. The module offers the possibility of configuration and customization for a variety of machine systems and applications, and runs on a DC power supply. This high quality PLC accessory functions as a positive logic discrete output module, offering up to 32 output points. Like other similar components in the series, this output module also has generic features such as a special keying system and ordered wiring. The module is designed to work with programmable controllers, which are the basic hardware for large and complex machine systems operating in harsh industrial conditions.
The IC697MDL752 output module responds in only 1 millisecond when turned on and off. The highly reliable output module has all the necessary protection functions and meets the requirements of bus standards such as the VME standard. The module complies with the requirements of standard C.1 revision and requires a current of 0.25 amps. The IC697MDL752 module has a 12-volt DC voltage rating and its outputs are divided into 4 groups of 8 each. The output of this module has a voltage range of 10 to 15 volts DC with a 10 amp surge current. The IC697MDL752 module can be installed in just a few simple steps. In addition, the module can be easily removed from the rack by pressing the plastic clip located on the back of the housing cover. In addition, the module has a convenient terminal board that allows the installation of wires with AWG #22 or #14 specifications.
