Technical specifications of IC697MDL753
Brand GE Fanuc
Series 90-70 series
Part number IC697MDL753
Rated voltage 5 volts DC / 10 to 60 volts DC
The output current is 16 mA / 0.5 amps per point at 5 V DC and 4 amps per group at 10 to 60 V DC
Output voltage range 5 volts DC or 10 to 60 volts DC
Required current 0.25 amps
Output quantity 32
Isolation voltage 1500 volts
Surge current 5 amps (Max.) for 20 ms
Response time 1 ms (Max)
Response time OFF 1 ms (Max)
Output voltage drop 1 V /2 ohms (Max)
The IC697MDL753 module manufactured by GE Fanuc is a negative logic component available through GE Series 90-70. The series offers a wide range of programmable logic controller units and accessories to extend their functionality. This output module provides status updates via an LED placed on the top of the device. The module is capable of running at the TTL level and can be highly configured for different tasks. The IC697MDL753 module has MS-DOs-based configuration software and can run on different versions of Windows operating systems. The module supports use with motor starters, solenoid electromagnets and other devices. The module can also select different failure modes for its output, providing better overall control.
The IC697MDL753 module has an output rated maximum voltage drop of 1 volt /2 ohms and a response time of 1 millisecond in the on or off state. The module has a rated DC voltage of 5 volts and a voltage range of 10 to 60 volts DC. In addition, the module has a rated current of 0.25 amps. The number of available outputs is 32. A common feature of the IC697MDL753 module and many other modules in this series is that all outputs are arranged in groups. The module can have a surge current of up to 5 amps in 20 milliseconds, and its output current includes 16 mA at 5 volts DC. The 10 to 60 volt DC voltage range is rated at 0.5 amps per point and 4 amps per set.
