Technical specifications of IC697MDL940
Brand GE Fanuc
Series 90-70 series
Manufacturer GE Fanuc
Manufacturer GE Fanuc; Emerson Automation (Current) Emerson Automation (current)
Part number IC697MDL940
Product description Relay output module
Series 90-70 series
Rated voltage 120/240 V AC or 5/24/125 V DC
Nooooo. Number of channels eight (8) C type (separate isolation); Eight (8) A-types
Product description Relay output module
Output quantity 16
Nooooo. Number of groups two (2) Group A table
Number of channels sixteen (16) relay outputs
The IC697MDL940 is a 90-70 series Programmable Logic controller (PLC) module, specifically a relay output module with a total of sixteen (16) relay output channels. Specifically, it has eight (8) Type C contact outputs and eight (8) Type A or normally open (N.O.), with each channel divided into two (2) groups of four (4) type A contacts per group. The module has a nominal rated voltage of 120/240 VAC or 5/24/125 VDC, with a maximum power consumption of 480 VA for AC loads and 60 watts for DC loads. It has a maximum rated load current of 2.0 amps from 5 to 265 VAC at 47-63 Hz; 2.0 amps, 5 to 30 VDC; 0.2 amps from 31 to 125 VDC and 0.2 amps from 31 to 150 VDC are available only for Type A contact output, while the module has a minimum load current of 10 mA. When used with inductive loads, the maximum response time of On and Off signal conversion for each output channel is 10 ms and the switching frequency is 20 times per minute. The module's output relays are fixed coil, moving-coil type, and the output contacts are made of silver alloy with a maximum contact resistance of 0.2 ohms and an expected contact life of 20,000,000 mechanical operations and 1,000,000 electrical operations under resistive inductive loads. Each output of the IC697MDL940 is fitted with a 3 amp fuse that serves as built-in channel protection along the buffer circuit, which consists of a 47 ohm resistor and a capacitor with a capacitance value of 0.015 μfd.
