Technical specifications for IC697MEM719
Brand GE Fanuc
Series 90-70 series
Part number IC697MEM719
Shelf life 10 years at 20 degrees Celsius
The memory retains the nominal value for 6 months, and no power is applied
Hot swap is not supported
Compatible with GE 771 and 772 cpus
Data storage support
Program storage support
Child board operation support
The GE Fanuc IC697MEM719 CMOS memory module offers 64, 128, 256, or 512 KB of memory capacity and is typically used for GE 771 cpus, GE 772 cpus, or PCM. The IC697MEM719 extended memory module can be used on PCM or CPU and does not require the use of additional slot configurations to store data or programs. When the memory is installed in the system as a child board and located in the same slot as the module it serves, the memory can be used to extend the logic and data memory. The IC697MEM719 memory module can retain information in its memory even in case of power failure. This is achieved through the built-in memory on the substrate shell. In addition, the PLC, CPU, or as a background task continuously checks the logic program memory for errors. PCM errors check the storage memory when restarting in the case of a hard or soft reset.
GE Fanuc Genius I/O IC697MEM719 CMOS Extended memory modules should be installed according to the applicable Programmable controller installation manual. During the installation process, the installation personnel should first verify that the rack is powered off. The 64-pin connector should be inserted into the connector on the baseplate, and the installer should engage all clasps. After following all the correct installation steps, the installer should place the IC697MEM719 memory module into the rack and turn on the power. For CPU installations, memory cleaning is done by using MS-DOS software or by using Windows programming software. For PCM, follow all manufacturer's instructions to ensure proper installation.
