Technical specifications for IC697PCM711
Brand GE Fanuc
Series 90-70 series
Part number IC697PCM711
Program memory 64, 128, 512, or 2586 KB
Power supply 1.0 amp
Connect the 3PL and 4PL
Shelf life at 20 degrees Celsius (68 degrees Fahrenheit) for 10 years
Memory retention nominal 6 months, no applied power
Slot model Single slot model
PC Programming Support
The IC697PCM711 module is a programmable coprocessor module manufactured by GE Fanuc. This single-slot programmable coprocessor module belongs to the GE series 90-70 and comes with a dual-task module that can be programmed to perform different functions. The different functions that the IC697PCM711 module can be programmed to perform include real-time computing, operator interface functions, and data functions. The IC697PCM711 module is used to perform operations related to storage, acquisition, and communication applications. Communication from the module to the PLC CPU is achieved through the backplane and does not require application support. The IC697PCM711 module comes with multiple PCMS that are supported by a single IC697 PLC system that can accommodate optional expansion memory with a capacity of up to 512 KB.
The IC697PCM711 module runs by using an extended memory subboard. It comes with a base memory with a maximum capacity of 95 KB of user memory. Extended memory subboards allow data or program memory to be expanded by 64, 128, 512, or 2586 KB. The IC697PCM711 module requires a 1 amp power supply that can come from a 5 volt bus. When installing the IC697PCM711 module, refer to the applicable programmable controller. Make sure the rack is powered off and install expansion memory if needed. In addition, it is necessary to connect the battery to any of the connectors that come with the device. The IC697PCM711 module should be able to run without an extended memory subboard. It can be programmed and configured simply by connecting an IC647 or IC640 computer or using an IBM-compatible PC.
