Technical specifications for IC697PWR722
Brand GE Fanuc
Series 90-70 series
Part number IC697PWR722
Type Power module
Nominal input voltage 24 volts DC
Range 21-32 volts DC
Power 156 watts
The surge energy is 22 J at 32 VDC.
Maximum output power 90 watts
Voltage regulation 5, 12 and -12 VDC
Overvoltage limit 6 to 7 volts
Temperature 0-60 degrees Celsius
Shock 15 grams for 11 milliseconds
The IC697PWR722 module is a power supply module designed and manufactured for use with programmable controllers in the 90-70 series. The module operates at 21 to 32 volts DC and includes three regulator voltages with a total output of 90 watts. These are rated at 5, 12 and -12 volts DC, and they operate at 16.5, 1.5 and 1 amp, respectively. The GE Fanuc Automation IC697PWR722 power module is located on the left side of the rack and can be attached or mounted on the rack. To function properly, the module needs to be connected to a compatible power adapter module, such as the IC697PWR720 module that connects the power output to the backplane of the rack. The module will also help monitor the TTL signal of the power module. The module will also use this module to define the logic of the operation.
The GE Fanuc Automation IC697PWR722 power module includes current protection for all outputs and inputs as well as system reset signals. The power module supports two-rack operation. When a second rack is connected to this module, this rack requires only 5 volts of power, and the current consumed by the second rack must be less than 5.2 amps. The second rack must be located near the first rack. The maximum length of the connecting cable is 3 feet. The GE Fanuc Automation IC697PWR722 power supply module can be installed in 2 different ways, the right side board is factory installed and mounted on the panel, or connected to the left side of the rack using the panel, the second option includes removing the right side board from the power supply, which requires the use of additional hardware.
