Technical specifications for IC697PWR724
Brand GE Fanuc
Series 90-70 series
Part number IC697PWR724
Nominal rated voltage 24 volts DC
Input voltage range 18-32 volts DC
Input power 160 watts
Maximum input surge energy 22 J
Maximum output power 90 watts
Output voltages 5, 12 and -12 VDC
Travel through time for 10 milliseconds
VME compatible
Temperature 0-60 degrees Celsius
Overvoltage limit 5 volts DC
The IC697PWR724 module is a power module designed, manufactured and distributed by GE Fanuc Automation. This power module can operate at 24 volts DC and 90 watts of output power. The module is designed so that it can be inserted into the rack, especially the leftmost slot. This module is connected via a 48-pin backplane mounting connector on the rack. The power supply module provides different voltages to adjust the operation and logic level sequencing signals. The GE Fanuc Automation IC697PWR724 power module can operate with a single rack application and can power up to 2 racks at a time. The total load must be within the rated specification and connected to the second rack by cable.
The GE Fanuc Automation IC697PWR724 power supply module has a nominal rated voltage of 24 volts DC and can accept input voltage range of 18 to 32 volts DC. The module also comes with overvoltage and overcurrent protection. If the module is used in an environment with temperatures higher than 60 degrees Celsius, it may need to be degraded. The GE Fanuc Automation IC697PWR724 power module has a rated input power of 160 watts and a maximum input surge energy rating of 22 joules. At 20 volts of direct current, its crossing time is 10 milliseconds. The output voltage can be 5, 12 or -12 volts DC, with specific current ratings of 26, 4 or 2 amps, respectively. This power module can be used with the VME integrated rack.
