Technical specifications for IC697VAL348
Brand GE Fanuc
Series 90-70 series
Part number IC697VAL348
Type converter board
Converter DAC series
Resolution 16 bit
Input channel 8
Buffer voltage output 10 volts
Currently 5 mah
Failed LED Yes, front panel
Connector noise
Eurocard Yes, double
Jumper. Yeah, six
The IC697VAL348 board is an 8-channel digital-to-analog converter board designed and manufactured by GE Fanuc Automation. The board can deliver up to 10 volts of output current with a positive binary input code or 2 different complementary codes. It has 16-bit resolution and can buffer 5 volts of output voltage at 10 mA. GE Fanuc Automation IC697VAL348 8-channel digital-to-analog Converter board Each channel has a 16-bit digital-to-analog converter with a front panel LED to indicate any faults that occur during operation. The board includes different features such as dual Eurocard form factors and high-reliability DIN connectors.
Before installing the GE Fanuc Automation IC697VAL348 8-channel DAC board, you need to check the table involving programming and factory jumpers to ensure that the technician knows the latest board specifications. After checking the information, the board can be installed in the VMEbus system when the device is powered off to avoid damage. The board should be placed in any slot other than the one reserved for the main processor. GE Fanuc Automation IC697VAL348 8-channel digital-to-analog converter boards are equipped with different jumpers that have been configured in the factory. These are base address selection switches (S1 and S2), JC switches that determine address modifiers, JA and JB switches that determine numeric codes, JD switches that enable program startup, and JE switches that enable external startup conversion modes.
