Model DS200NATOG2A
Brand GE
Type voltage feedback pantograph
The DS200NATOG2A is a voltage feedback zoom board.
The voltage feedback scale board DS200NATOG2A is used with two other boards in the LS2100 series, a gate distribution status board and a VME backplane. The model has five string outputs connected to a 20-pin strip joint.
|
Label
|
Specification
|
|
Model Number
|
DS200NATOG2A
|
|
Brand
|
GE (General Electric)
|
|
Type
|
Analog I/O Module (Mark VI Turbine Control Series)
|
|
Input Voltage
|
24VDC ±10%
|
|
Operating Temp
|
-40°C to +75°C
|
|
Communication Method
|
Mark VI Local Bus, Ethernet
|
|
Mounting
|
DIN Rail (35mm) / Mark VI Control Rack Mount
|
|
Weight
|
Approximately 1.1 kg
|
|
Certifications
|
UL 508, CSA C22.2 No. 14, IEC 61010
|
|
Dimensions
|
220mm × 150mm × 80mm (H×W×D)
|
|
IP Rating
|
IP20
|
|
Protocols Supported
|
Modbus TCP/IP, Mark VI Control Protocol
|
|
Number of Channels
|
8 Analog Inputs / 4 Analog Outputs
|
The GE signal regulator board has one terminal with terminals for 72 signal lines. It also includes a 50-pin connector. The terminal ids on the wiring terminals include OUT2, OUT1, COM1, COM2, P15.sO21, and L23. It also contains terminals for 6 signal lines.
When the GE signal regulator board is installed in the driver, multiple signal wires and ribbon cables may be connected. Some signal lines transmit signals from the circuit board to other electrical plates in the driver for processing. Other signal lines transmit signals to the board for processing. The signal is then sent to other boards for further processing. Since there are many wires, it is important to consider that air must flow freely inside the drive, and the wiring of the cables must ensure that they do not block airflow. When the drive is running, cold air enters the drive from the bottom and flows around, above and below the hot parts. These components include processing boards for sending and receiving signals. It also includes motors and associated moving parts. If the air is trapped in the wiring harness, the inside of the drive may become too hot. This will cause an overheating situation and cause the drive to shut down automatically.
The GE DS200NATOG2A is a versatile and advanced control system designed to provide reliable performance for a variety of industrial applications. The product is designed with the latest technology and features, making it an ideal solution for demanding industrial environments.
Product parameter
The GE DS200NATOG2A comes with the following parameters :· Input voltage :24 VDC
Working temperature: - 20 ° C to + 60 ℃ storage temperature: to 40 ° C to + 85 ° C, humidity: 5% to 95%, no condensation, size: 12.1 x7.5 x2.6 inches, weight: 2.2 kg
specification
The GE DS200NATOG2A is designed to meet the following specifications:. Comply with UL508C, CSA C22.2 No.14· Comply with CE, RoHS and WEEE directives
·EMC according to EN 61000-6-2 and EN 61000-6-4· Shock and vibration resistance according to IEC 60068-2
.IP20 protection level
