Model DS200NATOG2A
Brand GE
Type driver control card
The DS200SDCCG1AGD is a Mark V series drive control card developed by General Electric Company.
It is the main controller of the drive, equipped with three microprocessors and RAM that can be accessed by multiple microprocessors at the same time. If an error occurs, 10 leds on the GE drive control board are used to indicate the fault code. Ten leds are lined up, and when they are all lit, the fault code is displayed.
The GE Drive control board DS2O00SDCCG1AGD is one of the main controllers used in the Mark V series drives. The GE drive control board DS2oO0SDCCG1AGD is equipped with three microprocessors and RAM, and can be simultaneously operated by multiple microprocessors. <> leds on the GE drive control board DS200SDCCG1AGD are used to display the fault code in the event of a fault triggering error. Ten leds are lined up and display error codes together. If no errors are encountered and the board is functioning properly, the leds will light up in order from left to right, two leds at a time.
To view the LED of the DS200SDCCG1AGDH, you can open the board door, locate the board, visually inspect the LED and understand the condition of the board. However, you must be careful when opening the board door because of the high voltage present in the board and all components. Do not touch anything in the cabinet while the driver is powered on. Also, when the door is open, do not let anything fall into the cabinet, and close the door after the inspection is completed.
When the motherboard is first started, configuration parameters must be set to define how the motherboard handles information and controls the drive. There are several software tools available for editing parameters. These tools are available on your laptop. If you want to configure multiple devices at the same time, you can create a configuration and download the same configuration to multiple boards.
|
Label
|
Specification
|
|
Model Number
|
DS200SDCCG1AGD
|
|
Brand
|
GE (General Electric)
|
|
Type
|
I/O Module (Mark VI Turbine Control Series)
|
|
Input Voltage
|
24VDC ±10%
|
|
Operating Temp
|
-30°C to +70°C
|
|
Communication Method
|
Mark VI Local Bus, Ethernet
|
|
Mounting
|
DIN Rail (35mm) / Rack Mount
|
|
Weight
|
Approximately 0.9 kg
|
|
Certifications
|
UL 508, CSA C22.2 No. 14, IEC 61010
|
|
Dimensions
|
210mm × 140mm × 75mm (H×W×D)
|
|
IP Rating
|
IP20
|
|
Protocols Supported
|
Modbus TCP/IP, Mark VI Control Protocol
|
|
Number of Channels
|
16 Digital Inputs / 8 Digital Outputs
|
|
Response Time
|
ms
|
|
Signal Type
|
Discrete Voltage Signals
|
GE inverter control board DS200SDCCG1AGD is one of the main controllers of Mark V series inverter. The GE drive control board DS200SDCCG1AGD consists of three microprocessors and RAM and can be accessed by multiple microprocessors simultaneously. The 10 leds on the GE drive air separation board DS200SDCCG1AGD are used to display the fault code if an error has occurred that triggers the fault. Ten lights are arranged in a row, showing the error code together. If no errors are encountered and the motherboard is running properly, the indicators light up two at a time, from left to right.
