Technical specifications for IC660BBD110
Manufacturer GE Fanuc
Series Genius module I/O
Part number IC660BBD110
Module type Discrete input block I/O
Input voltage range 93-132 VAC
Nominal input voltage 115 volts AC
Input current (mA) Max. 80mA Blocking current plus 200mA Max input circuit current
Points sixteen (16)
Input Off state, input On state programmable thresholds (25% to 85%)
Input a fixed threshold of 10%-90% for short routes
Optional input filtering time 10 to 100 ms in 10 ms increments
Enter the diagnostic Open Wire, Short Circuit
Input ground or serial bus isolation 1500 volts
Product type Discrete input module
Input quantity 16
Output quantity none
Voltage type AC
Operating temperature 32 to 140 degrees Fahrenheit
Storage temperature -40 to 212 degrees Fahrenheit
Fault detection Short-line faults and open-circuit faults
The GE Fanuc IC660BBD110 is an independent block I/O with sixteen (16) input points. The module supports the Genius bus communication protocol, so it can be installed near the machine without installing a backboard, processor, or communication adapter along the module. The module is an intelligent input module that supports a Daisy chain topology and reports directly to controllers or communication adapters connected to the same network.
The IC660BBD110 input channels are designed to receive a signal voltage range of 93-132VAC with a frequency of 47-63 Hz and a nominal value of 115VAC. For ON and OFF states, it has a programmable threshold of 25% to 85%. The module is also equipped with an internal channel diagnostic function capable of detecting open and short circuits. Both diagnostic features also have a programmable threshold of 25-85% and a fixed threshold of 10-90%. The module has an input processing time of 1 ms and a software-configurable input filter of 10 to 100 ms in increments of 10 ms. This input filter allows suppression of noise and signal bounce.
The IC660BBD110 module measures 8.83 inches (22.44 cm) x 3.34 inches (8.48 cm) x 3.91 inches (9.93 cm) (height x width x depth) and weighs 4 pounds (1.8 kg). It is equipped with LED indicators such as unit normal, I/O enabled and separate input LED. It has 1500V internal isolation from ground to serial bus.
The IC660BBD110 is connected to the Genius bus via a junction box mounted below the module LED indicator. This terminal is a 3-pin terminal that can be accessed by opening the hinged door. The module can be mounted face up or upside down.
The IC660BBD110 discrete input module features advanced diagnostics and selectable thresholds. Some of the most common input-contact close connections are connected to devices such as switches, limit switches, and buttons. It can be connected to 2-wire proximity switch inputs and 3-wire proximity switch inputs. GE Fanuc Genius I-O IC660BBD110 discrete input blocks operate safely at full power over a temperature range of 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius). It can be safely stored in a temperature range of -40 to 212 degrees Fahrenheit (-40 to 100 degrees Celsius). The IC660BBD110 discrete input module is operated and stored in a safe environment with humidity levels between 5% and 95% and no condensation. This input block weighs 4 pounds or 1.8 kilograms. It measures 8.8 x 3.3 x 3.9 inches (22.4 x 8.4 x 9.9 cm). For device protection, the IC660BBD110 discrete input module can be configured with software to detect short-route and open-circuit faults.
