Technical specifications for IC660BLC001
Brand GE Fanuc
Series Genius I-O
Part number IC660BLC001
Product type Prefabricated cable
Cable type Beton 9182
Length 15 inches
With connector Yes
Impedance rating 150 ohms
Connection Type Bus connection
Compatible with terminal serial 1, serial 2, shielded input and shielded output
The IC660BLC001 cable is a 15-inch GE Fanuc cable. The IC660BLC001 cable is a Belden 9182 cable with connectors. The IC660BLC001 cable is a prefabricated cable with terminating connectors that simplify wiring between I/O blocks. Impedance of the cable is 150 ohms. Also available is a 36-inch GE Fanuc cable, recommended for field control installations. The IC660BLC001 cable is used for bus connection to Genius I/O modules, which are intelligent and configurable I/O modules. The two main components of a module are the electronic component assembly and the terminal assembly. Active components (including communication and I/O) are part of an electronic component assembly. The electronic component assemblies can also be removed without any interference to the field wiring.
The configuration data of the Genius I/O block is stored in the terminal components. Therefore, if the electronic component component changes, the module does not need to be reconfigured. A large number of I/O modules are available, including modules with 8, 16, and 32 inputs, modules with RTD inputs, modules with thermocouple inputs, and modules with inputs and outputs. Genius I/O blocks can be installed up to 7,500 feet from a computer or PLC. Genius I/O blocks can be installed in panels, on devices, and in junction boxes. The Genius I/O module operates reliably at temperatures up to 60 degrees Celsius. The IC660BLC001 cable is used for bus connection to the I/O module. The IC660BLC001 cable is connected to serial 1, serial 2, shielded input and shielded output terminals. The recommended way to connect the bus to the Genius I/O block is to connect it directly to the terminal assembly on the block.
