Technical specifications for IC660BRD021
Brand GE Fanuc
Series Genius I-O
Part number IC660BRD021
Product Type 24/48 V DC filling current block
Circuit 16
The 24/48 VDC input impedance is 5.6 kiloohms
The 24 volt DC input impedance is 1.8 kiloohms
Operating temperature 0 to 60 degrees Celsius
Storage temperature -40 to 100 degrees Celsius
Approval time 1.7 ms plus filter delay
The IC660BRD021 I/O block is a GE Fanuc 24 - or 48-volt DC rated drain type I/O block. Applications for the IC660BRD021 I/O block include use with solid-state and electromechanical sensors. The IC660BRD021 I/O block is a 16-circuit I/O block. When using a 24 volt DC supply, the input is turned on when the voltage is between 0 and 8 volts DC, and turned off when the voltage is between 17 and 24 volts DC. With a 48-volt DC supply, the input turns on when the voltage is between 0 and 16 volts DC, and turns off when the voltage is between 34 and 48 volts DC. The typical input impedance for 24 V and 48 V DC is 5.6 kΩ, and only 24 V DC is 1.8 kΩ. The typical input processing time is 1.7 ms plus an optional filter delay time.
The IC660BRD021 I/O module supports multiple input diagnostics, including open circuit, overheat, and switch fault diagnostics. The IC660BRD021 I/O module has 16 circuits, each of which can be configured as an output (such as an input) or a three-state input. The control power comes from an I/O device connected to the terminal. A separate power block is not required. The recommended storage and operating temperature ranges are -40 to 100 degrees Celsius and 0 to 60 degrees Celsius, respectively. The IC660BRD021 I/O block is rated for vibration of 5 to 10 Hz or 10 to 200 Hz. The IC660BRD021 I/O module is compatible with any handheld display. The IC660BRD021 I/O block is an open device and needs to be installed in a protective housing. The area of the mounting block should be free of airborne contaminants.
