Technical specifications for IC660EBA021
Brand GE Fanuc
Series Genius I-O
Part number IC660EBA021
Describe the Genius I/O module electronic component assembly
Application Genius I/O module
Operating voltage 18 to 56 volts DC
Input 6 Input circuit
Input signal formats Celsius, Fahrenheit, Ohms, or count
RTD Nickel, copper or platinum
Input resolution 0.1 ° C
Input accuracy +/ -1.0 ° C (platinum or nickel) and +/ -10 ° C (copper)
Enter update time 400 to 1600 milliseconds
Mounting terminal assembly
GE Fanuc IC660EBA021 Genius I/O Block Electronic component assemblies are manufactured for GE Genius I/O RTD (Resistance Temperature Detector) input blocks. The IC660EBA021 electronic component assembly can be ordered together with the terminal component as a complete factory-assembled module or separately as a single electronic component assembly with 6 input channels. The IC660EBA021 Electronics Assembly has six input circuits, divided into three groups of two, with an isolation voltage of up to 300 volts between each group. Each IC660EBA021 Electronics Assembly input is compatible with a nickel, copper, or platinum resistance temperature detector (RTD), and the input data from each input channel is linearized for the selected RTD type. The IC660EBA021 Electronics Assembly is factory calibrated and requires no additional on-site calibration. It has built-in diagnostic and protection features including open circuit detection, underrange/overrange detection, short circuit detection, fault detection and error detection for smooth operation.
The IC660EBA021 Electronics Assembly has a block voltage range of 18.0 to 56.0 volts DC with a maximum power rating of 7.0 watts. Its six iinput channels have a resolution of 0.1 degrees Celsius and absolute accuracy values of +/-1.0 degrees Celsius (platinum or nickel RTD) and +/-10 degrees Celsius (copper RTD). The IC660EBA021 Electronics Assembly has optional input update and filtering times (400 ms, 800 ms or 1600 ms) and resistance measurement ranges from 0 to 5000 ohms. The IC660EBA021 Electronics Assembly sends data to the CPU in one-tenth of a degree Celsius, Fahrenheit, ohm, or count format. The IC660EBA021 Electronics assembly can be mounted on the base of the terminal assembly by perfectly aligning it with the base and securing it securely with the fixing screws at the top and bottom of the terminal assembly.
