Technical specifications for IC660TBA104
Brand GE Fanuc
Series Genius I-O
Part number IC660TBA104
Block type 4 input and 2 output circuits
Rated voltage 115 V AC / 125 V DC
Supply voltage 93 to 132 volts AC / 105 to 145 volts DC
Maximum current 250 mA (AC) / 140 MA (DC)
Frequency/Ripple 47 to 63 Hz / 10% Max ripple
Power supply voltage drop time 1 cycle (AC) / 10 ms (DC)
Heat dissipation (Max.) 12 watts
Block to block isolation 1500 volts for 1 minute
Group to group 300 volts
Dimensions (H x W x D) 224 x 88 x 100 mm (8.8 x 3.5 x 3.9 in)
GE Fanuc's IC660TBA104 terminal assembly is part of the Genius I/O series, which includes 4 input circuits and 2 output circuits. This terminal guides the analog current and converts it to a digital value. The final value is directed to the CPU unit and all inputs are completely isolated from the block circuit. The IC660TBA104 terminal assembly supports specific data formats received via input at rates up to 8 bytes and is compatible with GE Series 90, Series 6, and Series 5 programmable logic devices. The terminal supports an output data rate of up to 4 bytes and converts it into the correct signal for use in the output device. This terminal is used for temperature monitoring, and all values are transmitted as complete integers. The terminal supports input and output using a handheld display and has advanced diagnostic functions, providing the necessary means for fault detection and reporting.
The IC660TBA104 terminal assembly supports individual scaling of its circuit, and it operates with the appropriate engineering units required to define the correct power level of I/O. Users can configure a handheld monitor connected to a terminal component in a few simple steps, and they can adjust the following parameters: output defaults, whether the device should remain in its last state, feedback/input transition times, and alarm thresholds. In addition, the IC660TBA104 terminal allows for proper protection of configured functions via a handheld monitor. The IC660TBA104 terminal assembly is designed for 115 V AC and 125 V DC voltage operation with a maximum current rating of 250 mA (for AC power supply) and 140 mA (for DC power supply).
