Technical specifications for IC693ACC323
Brand GE Fanuc
Series Series 90-30
Part number IC693ACC323
Number of leds 4
Product Type Power module
Supported components Programmable controller
Nominal rated voltage 120/240 VAC or 125 VDC
Input voltage range 85 to 264 VAC/100 to 300 VDC
Output power 5 VDC and 24 VDC relays
Output voltage 5 VDC: 5.0 VDC to 5.2 VDC (nominal 5.1 VDC)
Hold time minimum 20 ms
The IC693ACC323 module is a power module manufactured by GE Fanuc as part of the 90-30 series. This power supply module can operate at input voltages between 85 volts AC and 264 volts AC or 100 volts DC and 300 volts DC. The GE Fanuc IC693ACC323 power module has 3 different outputs with +24 V DC and +5 V DC relay power output voltages to power the 90-30 series output relay modules. The isolated +24 volt DC voltage is available for internal use in some modules and can also be used to power rated 24 volt DC input modules. The IC693ACC323 power module has 4 LED lights with the following labels: "PWR", "RUN", "OK" and "BATT".
The IC693ACC323 power module should be installed in the leftmost slot of any baseplate during installation. In addition, the input current should be 4 amps for a maximum duration of 250 milliseconds. The neutral, ground, and hot wire cables of the 120 volt AC power supply or L1, L2, and ground cables of the 240 volt AC power supply must be connected to the power box through the top three terminals, which are located on the terminal block on the front of the IC693ACC323 power module. The power connection from the DC power supply connects the positive and negative wires of the 125 volt DC power supply to the top 2 terminals of the terminal connector. Users must note that these connections are not sensitive to the polarity of the DC/AC input power supply.
