Technical specifications of IC693CPU323
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part number IC693CPU323
Product Description Embedded CPU mainboard
Product Type CPU mainboard
Nooooo. Number of I/O slots Ten (10)
CPU Type Embedded CPU
Nooooo. Number of power sockets 1 (1)
Voltage input 5 volts DC
Expansion baseboard slot is not available
Current input 430 MA
The user memory is 12 KB
Operating temperature 0 to 60 degrees Celsius
Processor type 80188
Timer/counter 340
Typical scan rate is 0.6 ms per 1K Boolean logic
The IC693CPU323 is a 90-30 series component manufactured by GE Fanuc. Specifically, this is a backboard with an embedded Turbo CPU. This is designed for small applications, as the IC693CPU323 does not support extensions, nor does it support advanced modules such as PCM and CCM modules. The IC693CPU323 CPU is classified as a turbo CPU with a typical scan rate of 0.6 ms per 1K Boolean logic. It loads 12KB of user memory, with a maximum or 6KB for versions prior to version 7. It supports up to 320 discrete I/O points; 64 word analog input and 32 word analog output. The IC693CPU323 provides 340 timer and counter units and also supports shift register instructions. The processor for the IC693CPU323 is 80188 with a clock speed of 10 MHz. It also provides serial interfaces that support the SNP Slave and SNP-X Slave protocols. It also supports the installation of optional communication features, including Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules. In addition to being non-scalable hardware, the IC693CPU323 does not support override functions, battery-operated clocks, and program interrupts. By default, it uses battery-powered RAM, but the battery is actually hosted by the PSU. It can also be installed with optional non-volatile memory such as EPROM and EEPROM. The IC693CPU323 supports panel mounting and is secured through the mounting holes provided for the baseplate. The device has a current load of 430 mA from a +5VDC power supply.
The IC693CPU323 baseboard is a GE Fanuc series 90-30 10-slot embedded CPU baseboard. Embedded cpus have the advantage of low cost, but they lack the power and versatility of modular cpus. An embedded CPU is a part of an embedded CPU baseboard in which the CPU and memory chips are soldered to the backplane of the baseboard. Embedded cpus cannot be changed, they do not support expansion or remote racks, and they do not have a day/night clock because the memory backup battery is located in the power supply, and unplugged the power will cause the battery to disconnect from the memory circuit, which will interfere with the day/night clock setting. The power supply requirements for the IC693CPU323 baseboard are 5 volts DC and 430 mA. The IC693CPU323 baseboard is not compatible with PCM and CCM devices. The module operates in a temperature range of 0 to 60 degrees Celsius. Interrupts, overrides, and battery backed clocks are not available on the IC693CPU323 substrate. Support Shift registers. The number of timers and counters available is 340. The single serial port on the IC693CPU323 mainboard supports only SNP slave and SNP-X slave communication protocols. Optional modules for Profibus, Ethernet and GCM protocols can be ordered separately if required. A total of 64 words are assigned to the analog input and 32 words to the analog output. The IC693CPU323 baseboard supports a total of 320 combined discrete inputs and outputs.
