Technical specifications of IC693MDL748
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL748
Product Type Digital I/O
Compatibility GE Fanuc 90-30 Programmable controllers
Output point 8
Current output 0.5 amps per point
Module current consumption 110 ma
Module voltage input 5 volts DC
Fuse breaker 2
Fuse rating 3.15 amps
Product life cycle status * Discontinued/obsolete
The IC693MDL748 I/O module is a GE Fanuc positive logical digital I/O module. The IC693MDL748 positive logic digital I/O module can be installed in the GE Series 90-30 PLC, which offers 8 output points with an output voltage range of 24 to 48 volts. The load current at each point is 0.5 amps. The module consumes 110 mA at 50 volts DC. The output type is the transistor output type and the polarity is positive. Each common has 8 output points. The connector type on the IC693MDL748 positive logic digital I/O module is the terminal with 20 screws that came with the module. The terminal board on the IC693MDL748 positive logical digital I/O module is equipped with fastening screws. In applications where the PLC is subjected to high levels of vibration, these screws help protect the connection of the terminal board to the module from damage.
To remove the terminal board on the IC693MDL748 positive logical digital I/O module, first loosen the fastening screw on the front of the board, and then follow the standard IC693 terminal board removal procedure. When installing the terminal board, follow the standard IC693 terminal board mounting procedure, then tighten the setting screws to 8 to 10 pounds per inch of torque. The IC693MDL748 positive logic digital I/O module has 2 fuses with dimensions of 5 x 20 mm and a rated current of 3.15 amps. Replacement fuses can be ordered if necessary. The equivalent Littlefuse and Bussman part numbers are 2173.15 and GDB-3.15A, respectively. The operating temperature of the eight output points on the module ranges from 0 to 60 degrees Celsius at 50 volts DC supply voltage. At 60 volts DC supply voltage, the eight output points operate in a temperature range of 0 to 50 degrees Celsius.
