Technical specifications for IC693MDL751
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL751
Product Type Digital I/O
Compatibility GE Fanuc 90-30 Programmable controllers
Output point 32
Output connector Honda 50 points
Output voltage range 12 to 24 volts DC
Module current consumption 21 ma
Output point peak output current 0.3 amp
Common peak current output 2 amps
Product life cycle status * Discontinued/obsolete
The GE Fanuc IC693MDL751 positive logic output module is a 12/24 volt DC rated positive logic output module with 32 output points. A 50-pin Honda connector located on the front of the module connects the module output to the user device. It can be connected to the field device by a direct method using a cable with a female connector at the module end, a tinned wire at the device end, or by wiring through a terminal. For the terminal method, a 50-pin module connector can be connected to a DIN rail mounted terminal assembly using a 3-foot cable and a 6-foot cable. These extension cables are for needle connections. GE Fanuc recommends using terminals to connect the field wiring to the 50-pin I/O module. The use of connector interfaces provides a convenient method for field wiring on the end module.
The IC693MDL751 positive logic output module can be used with GE Fanuc series 90-30 PLCS. It provides 4 groups of 8 output points each. The output voltage ranges from 12 to 24 volts DC (+20%, 15%). When all outputs are turned on, the IC693MDL751 positive logic output module absorbs 21 mA of current. "Per output" and "per common" peak current output ratings are 0.3 amps and 2 amps, respectively. Up to 1500 V isolation is provided between the logical side and the magnetic field side of the module. The IC693MDL751 positive logic output module has off state leakage and output voltage drop ratings of 0.1 MA and 0.24 volts DC, respectively. The IC693MDL751 positive logic output module has the positive logic feature. The IC693MDL751 positive logic output module is connected between the module output and the negative power bus. Indicators and solenoids are some of the devices that can be used with the IC693MDL751 positive logic output module.
