Technical specifications of IC693MDL760
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL760
Product Type Digital I/O
Compatibility GE Fanuc 90-30 Programmable controllers
24 volts DC output 5
Pneumatic output 11
Peak supply pressure 100 LBS/sq. inch
LED indicator Yes
Module peak current consumption 75 MA
Peak operating temperature 45 degrees Celsius
Product life cycle status * Discontinued/obsolete
The GE Fanuc IC693MDL760 output module is a solenoid valve output module. It offers 5 rated 24-volt DC power outputs and 11 pneumatic outputs. Each pneumatic output on the IC693MDL760 output module has an internal 3-way electromagnetic drive valve with the associated output connector located on the front panel of the module. When the output is ON, its corresponding valve connects the rated pressure source provided by the user (up to 100 PSI) to the output connector. The pressure source is connected to a connector located at the bottom of the module. When the output enters the OFF state, the output port on the corresponding valve will be vented. An external power supply rated at 24 volts DC is used to provide solenoid power. In addition, the power supply is connected to the DC output connector located on the front panel of the module.
The pneumatic output on the IC693MDL760 output module is fully grounded, and the external solenoid power supply range is 21.6 to 26.4 volts DC. At 24 volts DC, the solenoid's inrush and hold currents are 33 mA per valve and 13 mA per valve, respectively. The maximum response time for closing and opening is 12 milliseconds, respectively. Each output point provides an LED indicator that indicates whether the output is ON or OFF. The LED power indicator indicates whether the solenoid valve power is available. The IC693MDL760 output module has a maximum operating temperature of 45 degrees Celsius. The maximum backplane current is 75 mA. At 30 degrees Celsius, all pneumatic outputs can be continuously turned on, but at 40 degrees Celsius, only six pneumatic outputs can be continuously turned on, and at 45 degrees Celsius, only four pneumatic outputs can be continuously turned on.
