Technical specifications of IC693MDL931
Brand GE Fanuc
Series Series 90-30
Part number IC693MDL931
Rated voltage 24 volts DC, 120/240 volts AC, 50/60 Hz
Output voltage range 5 to 30 volts DC, 5 to 250 volts AC, 50/60 Hz
The output of each module is 8 isolated outputs
Maximum load The maximum resistance current per output is 8 amps
Minimum load 10 MA
The surge current has a maximum of 8 amps per cycle
The maximum Response Time is 15 ms
Shutdown response time maximum 15 ms
Product life cycle status * Discontinued/obsolete
The IC693MDL931 module is an isolation relay output PCB module designed and manufactured by GE Fanuc as an accessory to the 90-30 series GE PLC or programmable logic controller. It is suitable for use with a 24 volt DC power supply or 120 to 240 volt AC mains at 50 to 60 Hz. The GE Fanuc IC693MDL931 isolated relay output module offers eight isolated outputs, four of which are normally closed and the other four are double-throw outputs, meaning they have both normally closed and normally open contacts. Each output is rated at 8 amps, each relay output is isolated from the others, and each output has a separate common power terminal.
The GE Fanuc IC693MDL931 isolation relay output module does not come with the power required to operate the field equipment to which it is connected, nor does it provide fuses for overcurrent protection. Therefore, both the power supply and the fuse for the load circuit must be provided by the end user. The GE Fanuc IC693MDL931 Isolation relay output module is equipped with 8 LED status indicators at the top, corresponding to each output, which will be turned on and off, letting the user know if each output is turned on or off. Discrete applications such as control solenoid valves, motor starters and alarm indicators are the most common loads connected to the GE Fanuc IC693MDL931 isolation relay output module. The IC693MDL931 output module can be installed in any I/O port of GE Fanuc 90-30 PLC series devices.
