Technical specifications for IC693PWR330
Part number IC693PWR330
Series 90-30 pixels
Brand GE Fanuc
Product Type Large capacity power supply
The protocol supports RS485 interfaces
Nooooo. Output three (3)
Nominal rated voltage 120/240 VAC or 125 VDC
Input voltage range, AC 85 to 264 VAC
Input voltage range, DC 100 to 300 VDC
Input power 90 VA with VAC input; 50 W with VDC input
Surge 4A peak, Max 250 ms
Output voltage 5 VDC: 5.0 VDC to 5.2 VDC (nominal 5.1 VDC) Relay 24 VDC: 24 to 28 VDC Isolation 24 VDC: 21.5 VDC to 28 VDC
Output power 5 VDC: 30 W, Max 24 VDC Relay: Max 15 W 24 VDC isolation: Max 20 W
Hold time: Minimum 20 ms
Description Power supply unit
Voltage 120/240 volts AC, 125 volts DC
The IC693PWR330 is a large capacity power module that is part of the 90-30 series Programmable Logic Controller (PLC) product family. Compared to standard power supplies, the IC693PWR330 high capacity power module allows consumption of all 30 watts of load capacity to +5VDC output. This allows the power supply to be used in applications where +5VDC requires higher current capacity, typically in larger 90-30 PLC racks. This power supply can only be installed in the left-most slot of the rack. It is mainly used to provide power for the midplane and enable the modules connected to the midplane.
The IC693PWR330 has three (3) outputs. These outputs are the +5 VDC output, the +24 VDC relay power output, which powers the electronic circuits on the 90-30 series output relays, and the isolated +24 VDC, which is used internally by some 90-30 modules and can also be used to provide external power to the 24 VDC input card. The power supply has a load capacity of 30 watts. This load capacity is the total load of all outputs. Individually, a single maximum output is 30 watts for +5VDC, 20 watts for +24VDC, and 15 watts for +24VDC.
This high-capacity power supply features LED status indicators to indicate various states. This LED indicator includes the PWR LED, which is used to monitor whether the module is receiving sufficient external power supply; OK LED describes the overall operating status of the module; The RUN LED and BATT LED indicate the battery level.
The IC693PWR330 has an embedded RS485 communication port. This port is used to connect power to desktop or laptop workstations, GE Fanuc handheld programmers, and other compatible serial devices.
The IC693PWR330 module has a minimum hold time of 20 milliseconds. The power supply unit has industrial protection function. It has overvoltage and overcurrent protection limits of 5 volts DC output, 6.4 to 7 volts and 7 amps, respectively. The AC/DC power unit has 6 terminals for user connection. It supports AC and DC power connections. For AC power connections, the hot, neutral, and ground wires (also known as L1, L2) from the 120 volt AC power supply and the ground wires from the 240 volt AC power supply are connected to the system by using the first 3 terminals located on the front of the GE Fanuc Series 90-30 IC693PWR330 power module. Same for DC power supply. Use the +ve and -ve wires from the 125-volt DC rated power supply to the top 2 terminals of the connector. These connections are sensitive to the polarity of the power supply. The IC693PWR330 module is equipped with an RS 485 communication port for serial communication. The device is certified to UL and CE standards.
