Technical specifications of the IC697CHS750
Brand GE Fanuc
Series 90-70 series
Part number IC697CHS750
Description The rear mount I/O rack
Current 20 amps
Voltage 5 volts DC
Slot 5
Dimensions 11.15x12.60x7.5 inches
Rack cabinet 254 mm deep
Weight 2 kg
Cooling convection cooling
Housing open housing
Compatibility IC697 PLC series
The IC697CHS750 rack is an I/O rack manufactured by GE Fanuc. It connects the different components and modules in the GE 90-70 PLC product line together. It is equipped with 5 slots and has a rear mounting mechanism. The rack has an open housing and is suitable for indoor use only. It can be easily installed on the factory floor. Components connected in 5 slots can have their own independent power supply on the left side of the module location. The frame is compact and weighs about 2 kg. Its dimensions are 11.15 inches high, 12.60 inches wide and 7.5 inches deep. The housing of the frame is 254 mm deep. The IC697CHS750 uses airflow to prevent overheating. For convective cooling, the flow of air between the I/O frame and the nearest outlet should not be impeded.
GE Fanuc Series 90-70 IC697CHS750 I/O racks are rated for 20 amps. It operates on a voltage supply of 5 volts direct current. The rack supports other accessories, including the backplane J2 jumper kit, which is useful during the installation process. The rack is equipped with a detachable terminal that can be accessed through a hinged door. Cables connected to the rack run through the bottom of the hinged door. The I/O terminal fixing tape is located on one side of the rack to secure the terminal in place. The power connector is located on the inside of the frame along with the gasket. System noise can be eliminated by using grounding measures.
