Technical specifications of the IC697CHS771
Manufacturer GE Fanuc
Series 90-70 series
Part number IC697CHS771
Product type PLC rack
Number of slots 6
Number of supported systems 2
I/O bus current 0.5 amps
Voltage type AC and DC
Current consumption is 20, 11 and 18 amps
Maximum system cable length is 50 feet
The IC697CHS771 PLC rack is designed and manufactured by GE Fanuc in the GE 90-70 series. It is a rack for programmable logic controllers or PLCS with 6 slots per system that can support 2 systems at a time. The IC697CHS771 PLC rack can be used as part of different PLCS with different Settings. Six slots in the IC697CHS771 PLC rack are used to host various modules and I/O. The rack requires 0.5 amps of current from the PLC I/O bus to operate. It can consume 20 amps of current at 100 watts from a 120/240 volt AC or 125 volt DC power supply.
In addition, the GE Fanuc Series 90-70 IC697CHS771 PLC rack can draw 240 amps of current and 125 watts of power from either 11/120 volt AC or 55 volt DC. Draws 48 amps of current and 90 watts of power from an 18-volt DC supply and a 24-volt DC supply. For safety, the IC697CHS771 PLC rack and all other racks in the PLC setup must have the same ground potential, and the cable connecting the bus transmitter module (BTM) to the last bus receiver module (BRM) in the PLC must not exceed 50 feet in length. In addition to six slots for hosting different PLC devices, the IC697CHS771 PLC rack has an additional dedicated slot on the far left of the other slots for hosting power supplies.
