Technical specifications of the IC697CHS782
Brand GE Fanuc
Series 90-70 series
Part number IC697CHS782
Describe the VME integrator rack
Slot 17
Spacing 0.8 inches
Slot addressing support
Cooling method convection cooling
Installation flange must be filled
Shield ground support
Third-party VME module support
The IC697CHS782 rack is an integrator rack designed by GE Fanuc. The GE series 90-70 rack has 17 slots and is rear-mounted. The rack can be connected to modules with a spacing of 0.8 inches. The rack can be integrated with different GE IC697 PLC modules. The rack is compatible with third-party VME modules and can be integrated with cpus, different I/O configurations, and other devices and applications. The integrator operates using a backplane connector placed in the 0.8 "center. The rack enables multiple rack operations using only one power unit. It can easily run in high current configurations. The IC697CHS782 rack supports optional fan components for high-power modules.
The IC697CHS782 integrator rack must be installed with sufficient airflow space to provide room for equipment cooling. The airflow between the frame and the nearest ventilation source should not be obstructed. This cooling method is called convection cooling. The installation requirements are created by the application and the ordering rack being used. The operator needs to properly use the mounting flange that plays an important role in the installation and replacement of the rack. To configure the IC697CHS782 rack, a pair of jumpers are required on the backplane of the rack. These jumpers increase the flexibility of module installation. The VME integrator rack can accept AC/DC plugs and is easily operated using an external power supply. It provides slot addressing capabilities that allow operators to configure I/O points without using any additional accessories. The IC697CHS782 uses the bottom rail for shielding ground. The ambient operating temperature range should match the specified equipment temperature range.
