Technical specifications for IC697PWR713
Brand GE Fanuc
Series 90-70 series
Part number IC697PWR713
Type Power module
Nominal rated voltage 120/240 VAC or 125 VDC
Ac input 90 to 264 VAC
Frequency 47 to 63 Hz
Dc input 100 to 150 VDC
Input power 135 Watts (typical), 160 Watts (Max)
Voltage regulation 5, 12 and -12 VDC
Power factor >0.93
Maximum output power 100 watts (total power from all 3 outputs)
Operating temperature 0-60 degrees Celsius
The IC697PWR713 module is a power module in the PLC Series 90-70 product line manufactured by GE Fanuc Automation. This power module is designed to power 1 or 2 racks, depending on its specifications and requirements. The module operates at 100 W of output power and 135 W of input power at full load. It is very important to check these specifications so that the power module does not overload, mainly to ensure that it can run smoothly. The GE Fanuc Automation IC697PWR713 power supply module has a nominal voltage rating of 120 to 240 volts AC or 125 volts DC. When operating at AC nominal rated voltage, the frequency is 47 to 63 Hz.
The output voltage of the GE Fanuc Automation IC697PWR713 power supply module consists of the following voltages: 5 volts DC (20 amps current), 12 volts DC (2 amps current) and -12 volts DC (1 amps current). The IC697PWR713 power module comes with a plug-in mount mode and is designed to plug into the far left side of a VME Integrator rack or any standard IC697 rack. When the GE Fanuc Automation IC697PWR713 power module is used to power two different racks, the following conditions must be met: The total power required for the two racks needs to be within the capacity of the module, the current required for the second rack is less than 2.5 amps, and the two racks need to be mounted side by side and connected no more than 3 feet apart.
